Skip to content
How to Publish

Guidelines for Article Preparation for Submission

Preparing a Research Note
This page provides information about writing a Research Note for Gates Open Research, including the key sections that must be present in the article and details of figure and table formats. Please also refer to Gates Open Research’s editorial policies.
Gates Open Research’s scope covers all original research in any of the areas funded by the Gates Foundation, including global health and development, agriculture and education. All new findings supported by original source data are welcome regardless of the perceived interest and the extent of novelty (including null/negative and confirmatory results).
Research Notes are small, often preliminary studies, descriptions of unexpected and perhaps unexplained observations or lab protocols that can be described in a short report with a few illustrations (figures/tables), or even a single figure.
Submission to Gates Open Research is limited to Gates-funded researchers.
All articles must be written in good English. Please note that the article will not undergo editing by Gates Open Research before publication and a manuscript may be rejected during the initial checking process if it is deemed unintelligible and hence not suitable for peer review.
For authors whose first language is not English, it may be beneficial to have the manuscript read by a native English speaker with scientific expertise. There are many commercial editing services that can provide this service at a cost to the authors.
Main Sections
Please list all authors who played a significant role in developing the points presented in the article.
  • provide full affiliation information (full institutional address and ZIP code, and e-mail address) for all authors, and
  • indicate who is/are the corresponding author(s).
Criteria for authorship are based on the Uniform Requirements for Manuscripts Submitted to Biomedical Journals. Being an author implies full responsibility for the article’s content and that the work conforms to our editorial policies. For large, multi-centre collaborations, the individuals who accept direct responsibility for the manuscript must be listed as authors.
Details of each author’s contribution must be listed in the Author contributions section.
Anyone who has contributed but does not meet the criteria for authorship should be listed in the Acknowledgments section. The involvement of any professional medical writer assistance must be declared.
Please provide a concise and specific title that clearly reflects the content of the article.
Abstracts should be up to 300 words long and provide a succinct summary of the article. Although the abstract should explain why the article might be interesting, the importance of the work should not be over-emphasized. Citations should not be used in the abstract. Abbreviations, if needed, should be spelled out. For original research, we suggest that (if applicable) abstracts are structured into Background, Methods, Results, and Conclusions.
Authors should supply up to eight relevant keywords that describe the subject of their article. These will improve the visibility of your article.
Main Body
The format of the main body of the article is flexible: it should be concise, making it easy to read and review, and presented in a format that is appropriate for the type of study presented. A Research Note should be no more than 2500 words.
For most Research Notes, the following standard format will be the most appropriate:
  • Introduction
  • Methods
  • Results
  • Conclusions/Discussion
The format of Research Notes can be flexible as long as the authors ensure that they describe their methods and sources in sufficient detail for others to be able to repeat the research.
Research Notes can be as short as a single-figure paper. In such cases, all that is required is a short Introduction describing the question or hypothesis that led to the presented figure, followed by a description of the Methods used. The Figure (with underlying data) replaces the results section, and the Conclusion section is optional.
Standards of reporting: Standards of reporting guidelines help authors to ensure that they have provided a comprehensive description of their research, making it easier for others to assess and reproduce the work; for more detail and a comprehensive overview, see the FAIRSharing initiative. Available reporting guidelines for biological research can be found using the MIBBI Foundry filter on the FAIRSharing website; the EQUATOR network provides a comprehensive list of reporting guidelines for health research.
Gates Open Research endorses the ARRIVE guidelines; we encourage authors to consult the guidelines before the start of their study and all research involving animals must be reported in line with these guidelines. The guidelines apply to all species, including non-protected species and invertebrates.
All articles reporting in vivo experiments must conform with the ARRIVE Essential 10 checklist, and we encourage authors to ensure they report in line with the full ARRIVE 2.0 checklist. Authors should include a completed ARRIVE checklist with their article and this will be included in the Reporting Guidelines section of the article when published. As the online version of your article will not have page numbers please use section names rather than page numbers when completing the checklist.
The NC3Rs provide detailed explanations of each item of the guidelines with examples of good reporting from the published literature here.
Reproducibility: Gates Open Research is committed to serving the research community by ensuring that all articles include sufficient information to allow others to reproduce the work. With this in mind, Methods sections should provide sufficient details of the materials and methods used so that the work can be repeated by others. The section should also include a brief discussion of allowances made (if any) for controlling bias or unwanted sources of variability. Any limitations of the datasets should be discussed.
When antibodies are used, the species in which the antibody was raised, the manufacturing company or source laboratory, the catalogue or reference number, and whether it is a polyclonal or monoclonal antibody should be included. In addition, if the antibody has been previously validated, a reference to the validation study should be included. If the antibody has not been validated, full details of the dilution and use of the antibody should be given in the Methods section.
Where proprietary software is used for analysis, we require that details of an open-access alternative that can perform an equivalent function are provided. Where authors have written their own code in the course of their analysis, we require this to be written in (or compatible with) an open-source programming language.
We encourage authors to add Research Resource Identifiers (RRIDs) to their article in order to unambiguously identify the following types of resources: antibodies, genetically modified organisms, software tools, data, databases and services. More information on this project is available from the Resource Identification Initiative and RRIDs can be obtained from the RRID portal.
Where applicable, we also encourage authors to deposit a step-by-step description of their protocols on, where they obtain a persistent digital object identifier (DOI), which can be included in the Methods section of the article, using[PROTOCOL DOI] as the format (e.g. Authors should note that the protocol is only made public once they select “Publish” on
If the study involves the use of a questionnaire that has been validated by a previous study, this should be cited and a URL link provided to the validated questionnaire. If the authors have created a novel questionnaire (or performed a translation), the article must state if the questionnaire has been validated, and provide the following information:
  • Initial ace validity testing
  • Preliminary pilot testing
  • Reliability testing (internal consistency, test-retest, inter-rater)
  • Any changes implemented resulting from preliminary testing
The novel questionnaire should be provided as extended data.
Ethics policies: All research must have been conducted within an appropriate ethical framework. For studies involving humans or animals, details of approval by the authors’ institution or an ethics committee must be provided in the Methods section. Please refer to the detailed ‘Ethics’ section in our editorial policies for more information.
Clinical trials: If the data associated with your article relate to a clinical trial then the Trial Registration details must be provided: name of registry, registry number, and URL of the trial in the registry database. We support the public disclosure of all clinical trial results (as mandated in the US FDA Amendments Act, 2007), for example on a public website such as The disclosure of results on such sites does not preclude the publication of articles reporting and/or analyzing the same datasets in Gates Open Research. For further details about trial registration, see our editorial policies.
Sex and gender equity in research: Gates Open Research endorses the SAGER guidelines for reporting sex and gender information in study design, data analyses and results. Briefly:
  • Authors should ensure that the terms sex and gender are used correctly throughout the article.
  • Title/abstract: it should be clear if the results can only be applied to one sex or gender.
  • Introduction: if sex and gender differences are expected in the results, these should be stated.
  • Methods:
    • if sex and gender differences were taken into consideration for the design of the study these should be stated. If they were not taken into consideration, the rationale should be given.
    • explanation of how sex of participants was defined should be stated, either based on self-report, assigned following external or internal examination of body characteristics, or through genetic testing or other means.
  • Results: data should be presented disaggregated by sex and gender.
  • Discussion: implications of sex and gender differences in the results should be discussed. If sex or gender analysis was not conducted, the rationale should be given.
We encourage authors to consult the guidelines before performing their research and when writing their article. Our SAGER guideline checklist can be found here.
Data (and Software) Availability
Underlying data
All articles must include a Data Availability statement, even where there is no data associated with the article - see our data guidelines and policies for more information.
The Data Availability statement should provide full details of how, where, and under what conditions the data underlying the results can be accessed; for practical guidance please see Add a Data Availability statement to your manuscript. See also Prepare your Data and Select a Repository for further guidance on data presentation, formatting and deposition.
If you have deposited your datasets or used data that are already available in a repository, please include the name of the repository, the DOI or accession number, and license. This should be done in the style of, for example:

Repository: Confounding factors considered by studies of vaping as a possible gateway to smoking.

This project contains the following underlying data:
  • Data file 1. (Description of data.)
  • Data file 2. (Description of data.)
Data are available under the terms of the Creative Commons Zero “No rights reserved” data waiver (CC0 1.0 Public domain dedication).
Where data are held in a structured, subject-specific repository, the following example would be appropriate:
NCBI Gene: Ihe1 intestinal helminth expulsion 1 [ Mus musculus (house mouse) ]. Accession number 107537.
If you are describing new software, please make the source code available on a Version Control System (VCS) such as GitHub, BitBucket or SourceForge, and provide details of the repository and the license under which the software can be used in the article.
For other scenarios, such as where data cannot be shared, please see Add a Data Availability statement to your manuscript for details of what must be indicated in your Data Availability statement.
Extended data
There are no figure or table limits for articles in Gates Open Research. Additional materials that support the key claims in the paper but are not absolutely required to follow the study design and analysis of the results, e.g. questionnaires, supporting images or tables, can be included as extended data; descriptions of the materials and methods should be in the main article. Extended data should be in a format that supports reuse under a CC0 license. Care should be taken to ensure that the publication of extended data in this instance does not preclude primary publication elsewhere.
If you have any extended data, please deposit these materials in an approved repository and include the title, the name of the repository, the DOI or accession number, and license in the manuscript under the subheading ‘Extended data’. Please also include citations to extended data in the main body of the article. For practical guidance please see Add a Data Availability statement to your manuscript. See also Prepare your Data and Select a Repository for further guidance on data presentation, formatting and deposition.
Please note, information which can be used to directly identify participants should not be included in underlying and extended datasets, unless they have provided explicit permission to share their details. Please see our data guidelines for further information.
Reporting Guidelines
Articles in Gates Open Research must comply with consensus-based minimum reporting guidelines for research. Comprehensive lists of available reporting guidelines can be found on the EQUATOR network website for health research.
Checklists are available for a number of reporting guidelines, including:
Please deposit completed reporting checklists and flow charts in an approved general repository; include the guideline type, name of the repository, the DOI, and license in the manuscript’s Data availability statement in the style of, for example:
Repository: CONSORT checklist and flow chart for ‘Title of paper’.
Data are available under the terms of the Creative Commons Zero “No rights reserved” data waiver (CC0 1.0 Public domain dedication).
For articles involving patient/participant data or information (e.g. personal genomics articles, case reports, clinical trials, questionnaires, observations), authors must ensure that they have written informed consent from all the subjects involved (or their legal guardian for a minor, or next of kin if the subject is deceased). For details, see our editorial policies.
If applicable, please include a section entitled “Consent” and state ‘Written informed consent for publication of the participants/patients’ details and/or their images was obtained from the participants/patients/parents/guardian/relative of the participant/patient.’
Any clinical photographs must be accompanied by written consent to publish from the patient(s) involved. Any distinguishing features, medical record numbers or codes that could be used to identify the patient concerned must be removed from clinical images.
Author Contributions
We are using the CRediT Taxonomy to capture author contributions as we believe that having more detail of who did what brings transparency, enables recognition for researchers, and provides greater accountability for all involved. For more information click here.
You do not need to include an Author Contributions section in your manuscript: on submission, you will be asked for the contributions made by each author, to be selected from the list below. Anyone who has contributed but does not meet the criteria for authorship should be listed in the Acknowledgments section.
Contributor Role Role Definition
Conceptualization Ideas; formulation or evolution of overarching research goals and aims.
Data CurationManagement activities to annotate (produce metadata), scrub data and maintain research data (including software code, where it is necessary for interpreting the data itself) for initial use and later reuse.
Formal Analysis Application of statistical, mathematical, computational, or other formal techniques to analyze or synthesize study data.
Funding Acquisition Acquisition of the financial support for the project leading to this publication.
Investigation Conducting a research and investigation process, specifically performing the experiments, or data/evidence collection.
Methodology Development or design of methodology; creation of models.
Project Administration Management and coordination responsibility for the research activity planning and execution.
Resources Provision of study materials, reagents, materials, patients, laboratory samples, animals, instrumentation, computing resources, or other analysis tools.
Software Programming, software development; designing computer programs; implementation of the computer code and supporting algorithms; testing of existing code components.
Supervision Oversight and leadership responsibility for the research activity planning and execution, including mentorship external to the core team.
Validation Verification, whether as a part of the activity or separate, of the overall replication/reproducibility of results/experiments and other research outputs.
Visualization Preparation, creation and/or presentation of the published work, specifically visualization/data presentation.
Writing – Original Draft Preparation Creation and/or presentation of the published work, specifically writing the initial draft (including substantive translation).
Writing – Review & Editing Preparation, creation and/or presentation of the published work by those from the original research group, specifically critical review, commentary or revision – including pre- or post-publication stages.
Competing Interests
Articles published in Gates Open Research must not contain content that could be perceived as ‘advertising’ and must include a Competing Interests section. Any financial, personal, or professional competing interests for any of the authors that could be construed to unduly influence the content of the article must be disclosed and will be displayed alongside the article. More information on what might be construed as a competing interest is available in our editorial policies.
If you do not have any competing interests, add the text ‘No competing interests were disclosed’.
Grant Information
Please provide details of the Gates Foundation grant(s) that supported the work presented in your article in the following example format:
Bill & Melinda Gates Foundation [OPP124589, OPP438721].
If applicable, please also list any other funders or employers who funded the work. For each funder, please state the funder’s name, the grant number where applicable and known, and the individual to whom the grant was assigned.
Please do not list funding that you have that is not relevant to this specific piece of research.
This section should acknowledge anyone who contributed to the research or the writing of the article but who does not qualify as an author; please clearly state how they contributed. Authors should obtain permission to include the name and affiliation, from all those mentioned in the Acknowledgments section. Please note that grant funding should not be listed here.
Supplementary Material
To ensure all materials associated with a manuscript are visible, FAIR, and subject to peer review, Gates Open Research does not accept supplementary material. Additional materials that support the key claims in the paper but are not absolutely required to follow the study design and analysis of the results, e.g. questionnaires, or supporting images or tables, can be included as extended data. Extended data should be deposited in an approved repository and listed as part of the data availability statement. For more information, please see extended data.
References can be listed in any standard referencing style as long as it is consistent between references within a given article. However, basic requirements include:
  • Journal abbreviations should follow the Index Medicus/MEDLINE abbreviation approach.
  • Preprints can be cited and listed in the reference list.
  • Only articles, books and book chapters, datasets and abstracts that have been published or are in press, or are available through public e-print/preprint servers/data repositories, may be cited. Unpublished abstracts, papers that have been submitted to a journal but not yet accepted, and personal communications should instead be included in the text; they should be referred to as ‘personal communications’ or ‘unpublished reports’ and the researchers involved should be named. Authors are responsible for getting permission to quote any personal communications from the cited individuals.
  • Web links, URLs, and links to the authors’ own websites should be included as hyperlinks within the main body of the article, and not as references.
  • References to trials on a clinical trial database should be as follows: [Authors/name of group], [title of the trial], In: [cited year month date], Available from [URL of the link from].
    Example: Kovacs Foundation, The Effect of Ozone Therapy for Lumbar Herniated Disc. In: [cited 2012 Aug 30], Available from
  • Datasets published or deposited elsewhere (for example, in figshare, Dryad, etc.) should be listed in the "References" section and the citation to the dataset should follow one of these examples.
Figures and Tables
All figures and tables should be cited and discussed in the article text. There is no limit to the number of figures and tables you can have. Figure legends and tables should be added at the end of the manuscript. Tables should be formatted using the ‘insert table’ function in Word, or provided as an Excel file. For larger tables or spreadsheets of data, please see our data guidelines. Files for figures are usually best uploaded as separate files through the submission system (see below for information on formats).
Any photographs must be accompanied by written consent to publish from the individuals involved. Any distinguishing features, including medical record numbers or codes in the case of clinical images that could be used to identify the patient or participant concerned must be removed from the images.
Titles and legends: Each figure or table should have a concise title of no more than 15 words. A legend for each figure and table should also be provided that briefly describes the key points and explains any symbols and abbreviations used. The legend should be sufficiently detailed so that the figure or table can stand alone from the main text.
Permissions: If reusing a figure or table from a previous publication, the authors are responsible for obtaining permission from the copyright holder and for the payment of any fees (if applicable). Please include a note in the legend to state that: ‘This figure/table has been reproduced with permission from [include original publication citation]’.
Figure formats: For all figures, the color mode should be RGB or grayscale.
Line art: Examples of line art include graphs, diagrams, flow charts and phylogenetic trees. Please make sure that text is at least 8pt, the lines are thick enough to be clearly seen at the size the image will likely be displayed (between 75-150 mm width, which converts to one or two columns width, respectively), and that the font size and type is consistent between images. Figures should be created using a white background to ensure that they display correctly online.
If you submit a graph, please export the graph as an EPS file using the program you used to create the graph (e.g. SPSS). If this is not possible, please send us the original file in which the graph was created (e.g. if you created the graph in Excel, send us the Excel file with the embedded graph).
If you submit other forms of line art such as flow charts, diagrams or text to be displayed as an image, please export the image as an EPS file (e.g. if creating phylogenetic trees with specialized programs), or send us the original file that was used to create the image (e.g. EPS or AI files if Adobe Illustrator was used, or a DOC, DOCX, PPT, PPTX or equivalent file if Word or PowerPoint was used).
If none of the above options is possible then we also accept uncompressed TIFFs with a resolution of at least 600dpi at the size they are likely to be displayed at (see above).
Images (if applicable)
Photographs and microscopy images: Photographs and microscopy images should be submitted as uncompressed TIFFs with a resolution of at least 300dpi at the size they are likely to be displayed (see above).
Mixed images: Images that are a mix of half-tone images and line art (e.g. annotated gels or images with scale bars) should be submitted as TIFF files at a resolution of 500dpi or vector files (e.g. EPS or Adobe Illustrator files). Please ensure that the text size is at least 8pt and lines are thick enough to be clearly visible at the size the image will be displayed.
Images to be used as data: If you are submitting photographic images as part of your raw dataset, please submit them as uncompressed TIFF files.
Electronic manipulation of images: The clarity of figures may be improved using image-editing software, but this must be done transparently and without misrepresenting the data (and the original, unaltered source data must be provided with the article). Brightness, contrasts or color balance may be used to enhance electronic images, but such changes must be applied to the whole image; any non-linear adjustments must be made explicit in the figure legend. Specific features within an image must not be added or changed (e.g. amplified, removed or obscured); and if figures are composed from images that have come from different sources, such as different gels, or from different parts of the same source, this must be made clear on the figure (e.g. by adding dividing lines). Authors are required to include details of all modifications made to images published as figures or uploaded as data in the Methods section of an article, including the name of the software (with version number) used to make these modifications. Please see our Policies on Image Manipulation for more information.

Are you a Gates-funded researcher?

If you are a previous or current Gates grant holder, sign up for information about developments, publishing and publications from Gates Open Research.

You must provide your first name
You must provide your last name
You must provide a valid email address
You must provide an institution.

Thank you!

We'll keep you updated on any major new updates to Gates Open Research

Sign In
If you've forgotten your password, please enter your email address below and we'll send you instructions on how to reset your password.

The email address should be the one you originally registered with F1000.

Email address not valid, please try again

You registered with F1000 via Google, so we cannot reset your password.

To sign in, please click here.

If you still need help with your Google account password, please click here.

You registered with F1000 via Facebook, so we cannot reset your password.

To sign in, please click here.

If you still need help with your Facebook account password, please click here.

Code not correct, please try again
Email us for further assistance.
Server error, please try again.